Corning machine is mainly used for corning with bottom buckle, riveting shoe upper, belt, handbag and other products. There are a lot of things that need attention in the use of eye corns, so the following describes the matters that need attention when adding materials to the eye corns:

1. Before filling, pay attention to check whether the specifications of the operation set by the machine are consistent with the specifications of the material nails to be added. If they are not consistent, modify them to be consistent before adding.

2. Before filling, it is also necessary to check whether the nails filled meet the specifications of the machine. If they do not meet the specifications, they are not allowed to join, and forcing them into the machine will cause blockage and damage.

3. The material added to the coring machine can not be filled with the rotating funnel of the machine, and can only be filled with 2/3, because the transmission speed of the machine will be much slower if the material is filled.

4, when filling the material nail processing, pay attention to the changes in the nails on the conveyor belt of the corns machine, if it becomes very small, it is necessary to continue to add nails from the funnel to maintain the normal processing of the material.。